The XP95 A2S (4106-2003) addressable heat detector operates as both a fixed temperature and rate of rise, utilising a thermistor to monitor temperature, providing a precise output proportional to the surrounding air temperature.

The standard XP95 A2S heat detector is classified as a (Type A & B) device and will report an alarm at 55°C.

The XP95 Heat Detector is compatible with the XP95 Universal Detector Base, which incorporates the unique XPERT card, simplifying address configuration and enhancing installation efficiency.

This heat detector is an ideal choice for a variety of fire safety applications, providing dependable temperature monitoring for effective fire protection. The XP95 heat detector is also unaffected by wind or atmospheric pressure and is insect resistant.

The XP95 heat detector shares the same dimensions and colour as the other XP95 range of products, allowing it to be used with the universal detector base which comes with the unique XPERT card and is used to configure the address of the detector.

Ideal Use

Appendix M of Australian Standard AS 1670.1 provides guidance for the selection and use of detectors, and covers the the detection based one of the four characteristics of fire being: heat, smoke, carbon monoxide and flame (ultraviolet and infrared).

Appendix M offers guidance for the use of heat detectors in the following locations;

• Dusty Environments
• Warehouses
• Car Parks
• Kitchens and Restaurants
• Loading Bays
• Cold Rooms / Freezers (normal temperature duty)

Approvals

• AS ISO 7240.5-2004 - Point-type heat detectors

Specifications

• Operating Voltage: 17 to 28 VDC
  
• Quiescent Current: 250µA average 500µA peak
• Dimensions: 100mm Diameter x 50mm High including base
• Operating Temperature Range: -20°C to +70°C (no icing)
• Relative Humidity: 0 to 95% (non condensing)
• Ingress Protection rating (IP): IP53
• Weight: 157 grams including base

Compatibility

• XP95 Intelligent Detector Base
• Fire Alarm Control Panels
  • Ampac FireFinder Plus (AS7240)
  • Ampac Loopsense Fire (AS7240)
  • Ampac Firefinder (Legacy) (AS4428)

General information about heat detectors;

There are two main types of heat-sensitive element in each form as follows:

• Rate-of-rise detectors are preferred for general protection as they respond faster to fires by sensing rapid temperature increases.
• In environments with frequent rapid temperature changes, fixed-temperature detectors are recommended to minimise false alarms.

Suitability

According to AS 1670.1, where the ceiling height exceeds 9 meters, heat detectors are not generally suitable, and the location, sensitivity and type of detector selected should be considered.

~ Discounts For Bulk Purchases Applied at Checkout
~ Excludes Intelligent XP95 base